PROLOGIX_AUTO

Download Flojoy Studio to try this app

Toggle "Read-After-Write" mode on or off for the USB-to-GPIB adapter. When Read-After-Write is on, the Prologix USB-to-GPIB controller automatically reads a bench-top instrument's response after writing a command to it. Requires an OPEN_SERIAL block. Params: connection : Serial The open serial connection with the instrument. auto : select Use the read-after-write mode or not. Returns: out : String Response from the Prologix USB-to-GPIB controller.

Python Code

import serial
from flojoy import flojoy, SerialConnection, DataContainer, String
from typing import cast, Optional, Literal


@flojoy(inject_connection=True)
def PROLOGIX_AUTO(
    connection: SerialConnection,
    default: Optional[DataContainer] = None,
    auto: Literal["On", "Off", "Current state"] = "Current state",
) -> String:
    """Toggle "Read-After-Write" mode on or off for the USB-to-GPIB adapter.

    When Read-After-Write is on, the Prologix USB-to-GPIB controller
    automatically reads a bench-top instrument's response after writing a
    command to it.

    Requires an OPEN_SERIAL block.

    Parameters
    ----------
    connection: Serial
        The open serial connection with the instrument.
    auto: select
        Use the read-after-write mode or not.

    Returns
    -------
    String
        Response from the Prologix USB-to-GPIB controller.
    """

    # Start serial communication with the instrument
    ser = cast(serial.Serial, connection.get_handle())

    if ser is None:
        raise ValueError("Serial communication is not open")

    auto_integer = 0
    if auto == "Current state":
        ser.write(b"++auto\n")
    elif auto == "On":
        auto_integer = 1
    else:
        cmd = "++auto " + str(auto_integer) + "\n"
        ser.write(cmd.encode())

    s = ser.read(256)

    return String(s)

Find this Flojoy Block on GitHub

Videos

Control Agilent 34410A multimeter with Flojoy

Example App

Having problems with this example app? Join our Discord community and we will help you out!

Press enter or space to select a node.You can then use the arrow keys to move the node around. Press delete to remove it and escape to cancel.

Press enter or space to select an edge. You can then press delete to remove it or escape to cancel.

Download this Flojoy App

This app prepares the Prologix GPIB-USB adapter for use with a VISA instrument. The user can then send a SCPI command to a VISA instrument using the GPIB-USB adapter.

Parameters:

• Connection on all of the Blocks should be the COM port of the adapter.
• PROLOGIX AUTO: auto = off
• PROLOGIX MODE: mode = CONTROLLER
• PROLOGIX EOI: EOI = true, EOS = None (instrument dependent)
• GPIB address should match the instrument’s (see the instrument’s manual on how to find it)
• OPEN SERIAL: writing “*IDN?” with bytes encoding and a LF terminator

This app has two rows that are run seperately:

1. The top, setup, row with AUTO, MODE and EOI blocks.
2. The bottom row with WRITE and READ.

The two constants on the bottom left control which row runs. If they are equal, the setup row runs. Otherwise, the read/write row runs. The setup should be run before connecting the adapter to the instrument.

Note that the PROLOGIX READ should be used to recieve a response from the instrument. The AUTO mode can be turned on which recieves a response upon every command (PROLOGIX AUTO block controls this setting). However, this causes errors in some VISA instruments.